Component functions of cable stripper.

Component functions of Cable Stripper:

Under normal circumstances, people use the cable stripper more traditionally, take it back and use it immediately, and seldom study its parts, let`s analyze it together today:
1. Cable stripper inlet wheel: for transporting cables and stripping group outlets. When stripping short wires, both knots and tails are stripped (the wire length is less than 50mm). During stripping, in addition to stripping knots, it also has the function of stripping the middle several; small group outlet wheel: transporting cables And strip the end of the group. (It has no effect when the computer wire stripping machine strips short wires, it is necessary to make the gap of the group outlet wheel in a larger position);
2. Gap adjustment wheel of the incoming wire wheel: adjust the gap of the incoming wire wheel, rotate to the right to expand the gap, and move the gap to decrease (according to the size of the cable to adjust the stainless steel plate limited liability company); the pressure adjustment wheel of the cable stripper inlet wheel: Adjust the pressure of the inlet wheel, turn clockwise after pulling out, the pressure of the inlet wheel will increase, and turn in the opposite direction after pulling out, the pressure of the inlet wheel will decrease. (It is determined according to the compressive strength of the wire sheath of the cable, that is, the degree of difficulty of stripping the wire sheath. If it is difficult, the pressure will increase, and if it is easy, the pressure will decrease);

3. Gap adjustment wheel of the group outlet wheel: adjust the gap of the group outlet wheel, expand the gap when moving forward, and reduce the gap when rotating to the right (adjust according to the size of the cable); pressure adjustment knob of the group outlet wheel of the cable stripper: adjust the group outlet wheel Pressure, turn in the opposite direction after being pulled out, the pressure of the outgoing wheel of the group will increase, and turn clockwise after being pulled out, the pressure of the incoming wheel will decrease. (It is determined according to the strength of the wire sheath of the cable, that is, the degree of difficulty of stripping the wire sheath. If it is difficult, the pressure will increase, and if it is easy, the pressure will decrease); Tail, when the machine is turned off, the upper and lower cutter heads need to be opened to the maximum, so that the cable can be completed smoothly.

NINGBO MARSHINE POWER TECHNOLOGY Co., Ltd. Since 2000 have established the whole series of the Conductor Installation Device, Optical Fiber Cable Stringing Equipment , and cable installtion tools. Machines such as Hydraulic Wire Puller, Hydraulic Wire Tensioner, and Engine Power Winch, they are all get the high qualified certification, and through the ISO,testing report, and QA testing before delivery. To support the Transmission work, there is Gin Pole, Stringing Block , and Hoisting Tackle, and Special Block . Besides, other Lifting Tools , Tightener, Hydraulic Compressor and hydraulic pump, are very professionally produced, selling to the oversea countries more than 50. Emergency Restoration Tower and crossing structure, and Safety Tools And Accessories , we are not demand the MOQ, you can freely let us know your quantity, and give you the supportive and skillful opinions, while the competitive price.